Mobile switcher

This task is a utility which lets you change mobile interface parameters while running a Mobile logger task.

Parameters

  • Mobile interface: The Test Agent mobile interface on which to change parameters.

  • APN: New APN to switch to. Leave blank to keep the current APN.

  • Mode: Change the mobile device’s choice of preferred radio access technology and (in the case of LTE) preferred frequency band. Note that regardless of this setting, the mobile network has the final word on what RAT and band the mobile device will use.

    • Don’t change: No change from current setting.

    • Auto: No RAT or band preference.

    • GSM – Auto: The mobile device will prefer GSM as radio access technology.

    • WCDMA – Auto: The mobile device will prefer WCDMA as radio access technology.

    • LTE – Auto: The mobile device will prefer LTE as radio access technology. No preference regarding frequency band.

    • LTE – 2600: The mobile device will prefer LTE and the 2600 MHz band (LTE Band 7).

    • LTE – 2100: The mobile device will prefer LTE and the 2100 MHz band (LTE Band 1).

    • LTE – 1800: The mobile device will prefer LTE and the 1800 MHz band (LTE Band 3).

    • LTE – 900: The mobile device will prefer LTE and the 900 MHz band (LTE Band 8).

    • LTE – 800: The mobile device will prefer LTE and the 800 MHz band (LTE Band 5).